Environmental guidance for your business in Northern Ireland & Scotland
Before you can accept waste at your landfill site, you must confirm that the waste:
To confirm this, you need to see evidence of the waste's basic characterisation. This will be included as a waste description provided with the carrier's duty of care waste transfer or consignment note. You may also need to carry out compliance testing and on-site verification as defined in the annex to European Community (EC) Decision 2003/33/EC. This will help you to ensure that the waste has been brought to the right class of landfill site and enable you to manage it correctly.
There are different WAC for inert, non-hazardous and hazardous waste.
Landfills for inert waste may only accept inert wastes that meet the relevant WAC. You may be able to accept some inert waste types without testing at landfills for inert waste - these are listed in section 2.1.1 of Decision 2003/33/EC. To be accepted without testing, the wastes must be of a single type from a single source. Listed wastes of different types may be accepted together providing they are from the same source.
If you suspect that a waste listed in section 2.1.1 is contaminated, or you want to accept waste that is not on the list, you must test the waste first to confirm that it is not hazardous. If it is not, you must confirm that the waste meets the leaching limit values for inert waste in section 2.1.2 of Decision 2003/33/EC.
Landfills for non-hazardous waste may accept:
In Scotland, from 01 January 2014, separately collected dry recyclables are banned from landfill.
Further information can be found on the Scottish Government website:
WAC apply to non-hazardous waste but there are no numerical limits set for this, except where it is to be taken to a cell for stable, non-reactive hazardous waste. The control over waste acceptance is through the conditions set out in your PPC permit.
Non-hazardous household waste and the same non-hazardous waste from other sources can be accepted without testing.
Landfills for hazardous waste can only accept waste classified as hazardous.
To be acceptable at landfill, it must have been treated and meet the relevant WAC.
The WAC largely consists of numerical limits for leachable substances and organic content, along with standards for physical stability. For organic content, the parameters are:
You can use either LOI or TOC content to show compliance. The testing methods for both organic and inorganic substances are set out in section 2.4 of Decision 2003/33/EC.
There are specific criteria for the following waste types and activities:
You can find further information in Decision 2003/33/EC.
For further information on WAC:
The Northern Ireland Environment Agency has published a short guide to the duty of care responsibilities including advice and information for waste producers, carriers and those accepting, storing and treating waste.
Any person intending to alter the use or management of areas of uncultivated or semi-natural land must obtain prior approval from the Department of Agriculture, Environment and Rural Affairs (DAERA).
Read more on the DAERA website
The NetRegs team at SEPA, in partnership with The Northern Ireland Environment Agency, Natural Resources Wales and a number of industry bodies have produced 9 new GPPs to replace out of date PPGs. More are coming! Check the available topics
New guidance for Start-ups, charities and community projects
View our latest videos & subscribe to our channel.
Free monthly email newsletter with environmental updates for Northern Ireland and Scotland