Environmental guidance for your business in Northern Ireland & Scotland
A boiler or furnace burning fuel normally releases smoke through a chimney. Smoke darker than a specified shade of grey is officially classified as 'dark smoke'.
You must not cause or allow emissions of dark smoke from your chimney. See the page in this guideline dealing with dark smoke restrictions.
You must make sure that you comply with any emission limits required by permits or authorisations.
See the page in this guideline that covers boilers and furnaces - environmental authorisations
Your chimney must be high enough to prevent smoke, grit, dust, gases and fume emissions from damaging health or causing a nuisance. Your local council can refuse approval for a chimney that is not a sufficient height.
You must obtain approval from your local council for a chimney by satisfying them that your chimney will be tall enough to prevent its emissions becoming a nuisance.
You must apply for chimney height approval from your local council if:
your application must contain details of:
Your local council may apply certain conditions to their approval such as the rate and quality of emissions from your chimney.
A chimney may be exempt if it is used as part of:
If your use of the chimney changes you must re-apply for approval for the new emissions.
You are committing an offence if you use the chimney without approval from your local council.
You must fit all boilers with grit and dust arrestment equipment. You can apply to your local council for an exemption, but this will only be granted if the boiler will not create emissions that could damage health or cause a nuisance. For further information you should contact your local council.
Your local council can apply limits on emissions of smoke, grit and dust you produce. If you exceed these limits you may be committing an offence and could be prosecuted. Your local council is likely to set limits for sites with a history of complaints, or sites that use fuel or procedures they were not designed to use.
You should use the best practical means to minimise emissions, for example:
See the page in this guideline that covers checking and controlling air pollution.
Inspect your emissions regularly so you can detect problems early.
Plan and carry out maintenance to ensure that your furnace and boiler meets air emission standards and operates efficiently.
Use cleaner fuels, such as gas, to limit the environmental impact of your furnace and boiler.
Boilers and furnaces: Chimney heights
A day with Hydrology, SEPA's hydrometry unit is responsible for around 400 gauging stations and 350 rainfall monitoring sites. River gauging stations are important as they allow river levels to be monitored so flood events can be predicted and flood warnings sent out.
Brewing and Distilling Technical Drop-in Day: Waste, Water, Energy, Brewing and Distilling is booming due to high demand for quality Scottish beers and spirits. All this growth is also leading to a boom in food waste, energy and water use.
View our latest videos & subscribe to our channel.